Liangfeng Access Floor

Bare Type Steel Cementitious Infilled Raised Floor

Detailed Product Description

Bare type steel cement infilled raised floor is composed of panels, pedestals, an anti-vibration gasket and screws. The panel is placed on top of the pedestals with an anti-vibration gasket and then locked in place with the screws in the corner-lock holes. It is the new style building material. It is easy for install and maintance, removable, wires and cables can go through the bottom of the floor panel. It is also recycle and always used together with square carpets.

Steel Cementitious Raised Floor Description:

The standard cement infilled computer floors are used in this system. Instead of the tiles being laminated with a black conductive vinyl trim that serves as the edging, these panels have four holes drilled into each corner, where screws will secure the panels to the pedestals.

Panel size: 600x600mm and 24'' x 24''

Thickness: 33mm

 

Performance Selection Chart (Test in accordance with CISCA)

Bare Type Steel Cementitious Infilled Raised Floor (SCP-B)

Panel Type

Concentrated Load

Concentrated

Ultimate Load

Uniform Load

Impact Load

Rolling Load

10 Passes

10000 Passes

KN

LB

KN

LB

KN/M2

LB/ M2

N

LB

KN

LB

KN

LB

SCP 800B

3.6

800

10.8

2400

10

2250

550

124

2.7

600

1.8

400

SCP1000B

4.5

1000

13.5

3000

20

4500

670

150

3.6

800

2.7

600

SCP1250B

5.6

1250

16.8

3750

30

6750

670

150

4.5

1000

3.6

800

SCP1500B

6.7

1500

20.1

4500

40

9000

780

175

5.6

1250

4.5

1000

SCP2000B

8.9

2000

26.7

6000

50

11250

890

200

6.7

1500

5.6

1250

 

Understructure

Option1 Cross head pedestal & Border pedestal

Pedestal features three key pieces: an aluminum cross head, a solid steel rod, and a base plate. The cross head is fixed to a M18 or a M20 solid steel rod which is welded to the base plate, which is normally 100mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. For greater height you can use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness:1.2mm-2.5mm, Diameter 22mm-50mm) and provides greater load bearing capacity.

Finished Floor Height: 80mm - 1500mm. Each pedestal allows for approximately 15mm-25mm height adjustment.

Pedestal Coating: Galvanized or an Electrophoretic coating

 

PERFORMANCE SELECTION CHART

Bare Type Steel Cementitious Infilled Raised Floor (SCP-CL-PDT)

Item

FFH(mm)

Horizntal

Load

(N)

Vertical Load

(18KN)

Pedestal head

Screw Rod

Pedestal

Tube

Pedestal Base

CL-PDT

80~150

80~150

+/-15

500

Did Not Collapse

70x70mmCross

 Aluminum

M18 Or M20

/

100x100mm

CL-PDT

200~500

200~500

+/-25

500

Did Not Collapse

70x70mmCross

 Aluminum

M18 Or M20

Dia. 22 or 25mm

100x100mm

CL-PDT

550~800

550~800

+/-25

500

Did Not Collapse

70x70mmCross

 Aluminum

M18 Or M20

Dia. 32mm

100x100mm

CL-PDT

850~1500

850~1500

+/-25

500

Did Not Collapse

70x70mmCross

 Aluminum

M18 Or M20

Dia. 38mm

120x120mm

Border Pedestal Similar to the flat steel head pedestal. Mainly used in the corners and borders of the installation site.

 

Option2 Flat steel head pedestal with gasket

This raised floor pedestal features four key pieces: a black plastic head cap (ABS/PP), a flat steel square head (75mm), a solid steel rod, and a base plate. The flat steel head is fixed to a M18 solid steel rod and then attached to the base plate, which is normally 100mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. The black plastic head cap (ABS/PP) then neatly fits on the flat square steel head.

 

The other option is to use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness: 1 mm-2mm, Diameter 22mm-50mm)

Finished Floor Height: 80mm -1500mm. Each pedestal allow for approximately 15~25mm height adjustment.

Pedestal Coating: Galvanized or Electrophoretic

 

PERFORMANCE SELECTION CHART

Bare Type Steel Cementitious Infilled Raised Floor (SCP-PG-PDT)

Item

FFH(mm)

HorizontalLoad(N)

Vertical Load

(18KN)

Pedestal head

Screw Rod

Pedestal Tube

Pedestal Base

PG-PDT

80~150

80~150

+/-15

500

Did Not Collapse

75x75mm Flat Steel

M18 Or M20

/

100x100mm

PG-PDT

200~500

200~500

+/-25

500

Did Not Collapse

75x75mm Flat Steel

M18 Or

M20

Dia. 22 or 25mm

100x100mm

PG-PDT

550~800

550~800

+/-25

500

Did Not Collapse

75x75mm Flat Steel

M18 Or M20

Dia. 32mm

100x100mm

PG-PDT

850~1500

850~1500

+/-25

500

Did Not Collapse

75x75mm Flat Steel

M18 Or M20

Dia. 38mm

120x120mm

Option3 Bolted stringer system

Same understructure as the one used in HPL/PVC steel cement infilled panel system.

 

Tips for ordering:

1) Where will the raised floor be located?
2) What will be placed on the raised floor?
3) What are the loads that will be placed on the raised floor during construction as well as the loads on the floor during occupancy?
4) What is the Finished floor height?
5) What about the quantity?(How many square meters?)
If convenint, please kindly supply the answers for the above questions. In this way, we will know your projects better and make a perfect floor plan for your rooms.

Price Range: USD4~USD10/pc  If you order quantity is large, we can give you a good discount!

Any problems, please email us or call us! We will give you the quickest reply!

 

Inquiry Now

Image CAPTCHA
Enter the characters shown in the image.